Thiết bị chuyển đổi E1 sang Ethernet Humanity HM-C200B
Mã hàng : HM-C200B
Nhà sản xuất : Humanity
Xuất xứ : Trung Quốc
Humanity 4 E1 to 4* Ethernet Protocol Converter interface converter
Ethernet over E1 realizes 1~4 Ethernet transmission over 1~4E1.
This series converter comply with ITU-T G.7041, G.7042, G.7043, G.8040
and able to work with third party devices following same protocols. It is with
integration, low power consumption, stable performance and easy to use.
Main Features
- 1~4Ethernet transmission over 1~4E1
- Comply with ITU-T G.7041, G.7042, G.7043, G.8040
- Auto delete the fault E1channel and auto reuse after fault clearance
- E1 loop back function offered for easy maintenance
- The E1 spur track on both sides cna be connected not according to the serial
number. If one E1 channel fails, the rest channels can still work
- RS232 hyper terminal or SNMP optional
- Alarm switch offered to display local/remote alarm for 8E1 to 4Ethernet converters
- Ethernet port supports VLAN and flow control
A: Indicators for monitor and easy maintenance.
B: SEL switch for alarm, loop, VLAN division setting.
C: Local or remote alarm choose button & RS232 or SNMP NMS choose button.
D: RS232 or SNMP NMS inerface.
E: Power interface. AC or DC optional
F: 4Ethernet with RJ45.
G: 1~4E1 interface with BNC and RJ45
Technical Specifications
|
E1
|
1~4E1 available
|
|
Comply with ITU-T G.703, G.823
|
|
Both offer BNC and RJ45
|
|
BNC for 75Ohm, RJ45 for 120Ohm
|
|
Ethernet
|
Comply with IEEE802.3
|
|
1~4Ethernet with VLAN
|
|
Auto adapt full/half duplex, MDI/MDIX, 10/100M
|
|
Frame length: 64bytes~1916bytes
|
|
Connector: RJ45
|
|
Management
|
Default with RS232 hyper terminal NMS
|
|
SNMP (optional)
|
|
Power
|
Voltage: AC110/220V and DC-48V
|
|
Power consumption: less than 10W
|
|
Environment
|
Operating temperature: -5°C~50°C
|
|
Storage temperature: -40°C~70°C
|
|
Relative humidity: less than95%, non-condensing
|
|
Dimensions
|
483*175*44mm
|
|
Weight
|
Net weight: 2.78kg/pc
|
|
Gross weight: 3.2kg/pc
|
Accessories
- RJ45 plug for Ethernet
- SNMP NMS CD if needed
- AC110V/220V power cord if AC is required
- 2 mounting brackets
- 1pc User Manual
Typical Application
